Quality you can verify, not just claim.
Every GEOLiNK board is tested and certified against a defined envelope — 8 certification areas, a −20~+60℃ aging cycle and IPC-A-610 Class 2/3 solder inspection.
Certification wall
The marks a GEOLiNK board carries — with the optional items flagged where your market drives the spec.
Aging & environment data
The thermal envelope our boards are actually cycled against.
Reliability design
Reliability designed in at the schematic, before it is ever manufactured.
Watchdog 0-255s
A configurable hardware watchdog resets a hung system automatically — the first line of defense for 7×24 unattended sites.
Wide-voltage input
DC 9-36V input models handle vehicle and battery-fed rails, with ignition/ACC control on in-vehicle builds.
TPM 2.0
Optional on-board or external TPM 2.0 for secure-boot and key-handling in connected equipment.
Fanless options
Passively cooled models keep noise down for medical and retail, with no moving parts to wear out.
Inspection standards
Which standard governs each inspection step, so you can audit us to a named criterion.
| Stage | Standard | Criterion |
|---|---|---|
| Solder joint inspection | IPC-A-610 | Class 2 / Class 3 acceptance |
| PCB fabrication | IPC-6012 | Board & laminate qualification |
| EMC emission | EN 55032 / EN 55035 | Radiated & conducted limits |
| Medical reference | IEC 60601 | EMC & safety referenced |
| Rail reference | EN 50155 | Optional ruggedness (in-vehicle) |
Get a datasheet with our test report
We share aging data, EMC reports and IPC inspection criteria on request.